E-GLIDER cruise

Specification / focus of the model.

Specification / focus of the model.

This model is designed for those who prefer the classic PPG flying, with a standard upright seat for a comfortable start and full protection of propeller for maximum pilot safety. Thanks to the mobile frame is the machine alsoable to responds to the weight transfer. It is equipped with a larger 48-72Ah battery that allows up to 50 minutes of autonomous operation. At a standard power setting of 15kW, the ascension is 2.2 m / s. (depending on the used wing). The machine is equipped with three-leaf propeller with central screw, for quick assembly and dismounting.

Model characteristics.

Model characteristics.

Quick preparation for flight
Quickly removable battery
Low weight
15kW Power
Maximum climb of 2.2m / s and min. 50 minutes of autonomous operation (depending on the wing used)
100% pilot protection
Pleasant sitting in the seat with a good perception of the wing
Minimum resistance of the cover bin and the propeller
Silent operation without vibration.
Storage.
Fast charging of the batteries thanks to the smart charger.

Basic technical parameters.

Basic technical parameters.

The protective frame is made of carbon-kevlar composite.
SONY Li-ion up to 72Ah 4536Wh Battery
Maximum engine power 15Kw
Maximum battery voltage 63V
Maximum propeller speed (three-blade) 125cm 2450 rpm
Maximum static thrust xxN (xxKg)
Endurance of one flight per beating of batteries approx. 50min.
Fully charge the battery for 100-120 minutes
Construction - all-composite.

Suitable wing.

Suitable wing.

This machine is designed for classic "cruise" flying, therefore the most suitable wing is the EN / LTF category and ideally B for better flight sustainability.

A look behind the scenes of producing a new model

E-glider CruiseE-glider CruiseE-glider CruiseE-glider CruiseFrame detailWireless throttle handle Wireless throttle handleE-glider cruise sunset